Technician inspecting a subfloor vent on a weatherboard house for rodent entry

Borer · Ellerslie

Borer Treatment Ellerslie

Bungalows from the 1920s, brick-and-tile from the 1960s, townhouses from every decade since. The build year tells us most of what to expect.

Borer in Ellerslie: what to expect

Ellerslie has a mix of house ages on most streets, so we start with when the house was built. The 1920s and 1930s bungalows are untreated native timber and carry the real borer risk. Houses from the 1960s onwards were mostly framed in boron-treated pine and rarely have structural borer. Some homes built between the late 1990s and 2004 used untreated kiln-dried framing and are worth a check. Treatment typically costs $350 to $950 including GST.

Ellerslie houses by era

Ellerslie grew up around the racecourse and the railway, and its oldest houses are bungalows from the 1920s and 1930s, with low-pitched roofs, enclosed bases with vents, and native timber floors and framing. After the war came brick-and-tile houses, and more recently townhouses and infill on subdivided bungalow sections.

For borer, those eras are very different. Pine framing treated with boron, used from the 1950s, is protected against borer. The risk sits in the original bungalows and in the short period, roughly 1998 to 2004, when untreated kiln-dried framing was allowed. The second group is a small part of Ellerslie but worth knowing about if you own a house from those years.

Main build era
1920s bungalows; 1960s; townhouses
Typical house
Californian bungalow with an enclosed base
Borer seen most
Common house borer
Zone most often active
Low bungalow subfloor
Access issue
Low crawl, shallow-pitch roof space

Hotspots

Where borer shows up in Ellerslie homes

Bungalow subfloors

A bungalow's enclosed base keeps the subfloor dark, and the crawl space can be as low as 300 mm at the shallow end. Bearers and joists near blocked vents are where we most often find fresh dust.

Bungalow roof spaces

The low roof pitch leaves a tight roof space, often only crawlable down the middle. Activity in the rafters near the eaves is easy to miss for that reason.

Original bungalow joinery

Leadlight casement windows and their frames, and timber front doors, are native timber and often show holes in sills and bottom rails.

Mixed old and new on one section

Where a bungalow has a newer townhouse behind it, the old house is the source. Borer does not usually move into the new treated framing, but it can reach untreated timber such as old fence posts and garden structures.

Inspecting an Ellerslie bungalow

Bungalow subfloors are usually reached through a small door in the enclosed base or a hatch inside. Where the crawl is too low in places, we inspect from the high side and from the vents, and note on the report which areas we could and could not see. In the roof, the low pitch means we work along the centre and reach towards the eaves with a lance.

If you are not sure when your house was built, the council property file or LIM usually says. Send us the year when you book and we can tell you whether an inspection is likely to be worth it.

Borer treatment cost in Ellerslie

A bungalow subfloor treatment starts from about $750 including GST, and a roof void from about $350. Low crawl spaces take longer and sit towards the top of our typical $350 to $950 range. For a 1960s or later house with a few holes in an old piece of furniture or a skirting, the job is usually small and quoted after we have seen it.

Questions

Borer treatment in Ellerslie: questions

Our house was built in 1965. Do we need to worry about borer?
Usually not in the framing. Most houses from that time were framed in boron-treated pine, which borer rarely attacks. Old furniture, native timber floors added later, or reused timber can still have borer, so if you see fresh holes or dust, it is worth checking what they are in.
We own a townhouse built in 2002. Is that at risk?
Possibly. Between about 1998 and 2004 some homes were built with untreated kiln-dried framing. If yours was, the framing is not protected against borer. Borer in that framing is uncommon so far, but a check is worth doing if you see holes or dust.
Why is the borer only at one end of our bungalow?
Usually because that end is damper or less ventilated. In an enclosed bungalow base, a blocked vent, a leaking downpipe or a garden bed against the wall raises the moisture under one part of the floor, and borer develops faster there.
Can you treat the leadlight window frames without damaging them?
Yes. Painted frames and sills are injected through the flight holes rather than sprayed, so the glass, paint and putty are left alone.

Close by, we also cover borer treatment in Remuera and Onehunga. For the species, the treatment steps and the flight season in detail, go back to borer treatment in Auckland.

For other pests in the area, see pest control in Ellerslie.

Seen fresh borer dust in Ellerslie?

Give us the year the house was built, if you know it. For many Ellerslie homes that answers half the question before we arrive.

Free estimate · No obligation · Auckland-wide

Call now Free estimate